Replace Door Handle

Replacing a door handle can be a straightforward DIY task that requires minimal tools and can significantly impact the look and functionality of a door. This article will guide you through the process step by step of how to replace door handle.

1. Preparation and Safety

Before beginning, gather all necessary tools and materials. You’ll typically need a new door handle, a screwdriver (Phillips or flat-head, depending on the screws), and possibly a drill. Ensure your new handle is the correct type for your door and matches the existing lock mechanism if needed. Safety is paramount, so work carefully to avoid damaging the door or injuring yourself.

2. Removing the Old Handle

Start by opening the door and locating the screws on the handle. These are usually found on the indoor side of the door. Unscrew them carefully, making sure not to strip the heads. As the screws are removed, hold onto the handle to prevent it from falling. Once all screws are out, gently pull the handle from both sides of the door. If there’s resistance, check for any hidden screws or a small slot with a release mechanism, often found in more modern handles.

3. Preparing for the New Handle

With the old handle removed, take a moment to clean any dirt or debris around the area. This is also an ideal time to paint or touch up the door if needed. Ensure the new handle will fit the existing holes and mechanisms. If your new handle has different dimensions, you may need to drill new holes or adjust the existing ones.

4. Installing the New Handle

Carefully align the new handle with the holes in the door. If your handle has a locking mechanism, make sure the lock is on the correct side of the door. Start by threading the screws by hand to ensure they’re correctly aligned, then tighten them with the screwdriver. Avoid over-tightening, as this can strip the screws or damage the door.

5. Checking the Mechanism

Once the handle is installed, test the mechanism several times to ensure it operates smoothly. The handle should turn easily, and the latch should retract and extend without sticking. If there’s a lock, test it from both sides to ensure it’s functioning correctly.

6. Troubleshooting Common Issues

If the handle is loose, ensure the screws are tightened sufficiently. If the latch sticks, it may be misaligned with the strike plate on the door frame. Adjusting the strike plate position can often resolve this issue. If the new handle doesn’t fit perfectly, you might need to enlarge the holes slightly, but do this cautiously to avoid unnecessary damage to the door.

7. Finishing Touches

Once satisfied with the installation, clean up any debris or dust. If you’ve drilled new holes, you might want to fill and paint over the old ones for a cleaner appearance.

8. Maintenance Tips

Regularly check your door handle for loose screws and wear. Keeping the mechanism clean and lubricated can prolong the life of your handle.


Replacing a door handle is a simple yet satisfying project. With the right tools and a bit of patience, you can refresh the look of your door and ensure its functionality. Remember, taking your time to align everything correctly during installation will result in a smoother, more professional finish.

How to choose sofa color for home

Categorized in:

Home Improvement,

Last Update: 11 December 2023